Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Instructions for using the TV and media equipment, using either the in-room computer, or a laptop, or both.

Using the Media:

  • Use the controller to power the projector on/off.

  • Select PC on the control to display computer content on the screen.

  • On the keyboard, select Windows Key + P to Duplicate the teaching station monitor (mirror the content on teaching station monitor to the screen), or Extend (have content on the teaching station monitor separate and move content back and forth between teaching station monitor and screen display.)

  • The HP Mini computer is located on the teaching station monitor. It is on the OTC network and can be used to access network files. Wake the PC by clicking the mouse or pressing any button on the keyboard, then enter you OTC username and password. Note: If the computer appears shut down, press the power button.

  • There is a USB cable below the computer that can be used with a flash drive.

Personal Device:

Wireless Display (Windows Laptops & Android Devices)

  • Select Wireless Display on the control.

  • On your laptop keyboard, press Windows Key + K to connect.

  • On your laptop, select Room Name. You will need to enter a pin the first time. (Shown on screen)

  • Once connected, you laptop screen will display on the screen.

  • Press Windows Key + P to change the display options.

  • When you are done, press Windows Key + K again to disconnect your laptop from the screen.

HDMI

  • Select Laptop on the control.

  • Connect your laptop to the HDMI Cable (behind the left side of TV). Note: There is an adapter on the cable for use, if your device doesn't have an HDMI port.

AirServer (Apple Devices)

  • Enables Apple users to wirelessly mirror their personal display over to the big screen.

  • For further AirServer Instructions, click on the AirServer link under Additional Info.

    • Note: Every classroom should have AirServer capability. If you find that a classroom does not have AirServer capability and you would like it to be added, contact the Help Desk (contact information below).

When Finished:

  • Sign out of the computer, and select OFF on the control to power down the projector.

Additional Questions?

If you need additional help, please contact the Help Desk:

Additional Info.

AirServer instructions

  • No labels