Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

ABSTRACT

Instructions for using the TV and media equipment, using either the in-room computer, or a laptop, or both.

ADDITIONAL INFO

Using the Media:

  • Use the control to power the TV on/off.

  • The wireless keyboard and mouse can be used to interface with the computer. (The keyboard and mouse can be moved throughout the room as needed.) Note: Make sure both the wireless keyboard and mouse are switched on.

  • Select PC on the control to display computer content on the TV.

  • On the keyboard, select Windows Key + P to Duplicate the teaching station monitor (mirror the content on teaching station monitor to the TV), or Extend (have content on the teaching station monitor separate and move content back and forth between teaching station monitor and TV display.)

  • The HP Mini computer is located on the station monitor. It is on the OTC network and can be used to access network files. If the computer appears shut down, press the power button. Note: Wake the PC by clicking the mouse or pressing any button on the keyboard. Then enter your username and password.

  • There is a USB cable below the computer that can be used with a flash drive.

Personal Device:

Wireless Display (Windows Laptops & Android Devices)

  • Select Wireless Display on the control.

  • On your laptop keyboard, press Windows Key + K to connect.

  • On your laptop, select Room Name. You will need to enter the pin the first time. (Shown on TV)

  • Once connected your laptop screen will display on the TV.

  • Press Windows Key + P to change the display options.

  • When you are done, press Windows Key + K again to disconnect your laptop from the TV.

AirServer (Apple Devices)

  • Enables Apple users to wirelessly mirror their personal display over to the big screen.

  • For further AirServer instruction, click the AirServer link under Additional Info.

    • Note: Every classroom should have AirServer capability. If you find that a classroom does not have AirServer capability and you would like it to be added, contact the Help Desk (contact information below).

When Finished:

  • Sign out of the computer, and select OFF on the controller to power down the TV.

Additional Questions?

If you need additional help, please contact the Help Desk:

  • No labels